Do you come out to St. George?

Yes. St. George is where the shop is and inside the everyday dispatch radius. Site measures, installs, deliveries, and on-site repairs are all routine.

Is there a trip charge to St. George?

Travel is included in the quote you get up front. It is not added afterward. Inside the everyday radius most jobs carry no separate trip fee.

Do you handle design review or HOA approval in St. George?

Yes, where the neighborhood has one. The drawing packet with materials, finish, and dimensions is part of the job. If your St. George lot has no review process, the same drawing is what you approve before material is cut.

The shop is in St. George, Utah. Shop-built pieces such as rails, gates, furniture, and spools are fabricated there and brought to St. George. Repairs and tie-ins are done on site with the mobile rig. The same truck covers Washington City, Santa Clara, Ivins, and Leeds.

Custom gates · St. George, UT · Washington County · home base

Custom gates in St. George, Utah.

Driveway, courtyard, and pedestrian gates for St. George. Designed to the house, built automation-ready in St. George, and installed by the same welder, from the shop here in town.

Call (406) 480-4912

Call or text. St. George is on the regular route.

Request a quote

Drive from shopHome Base

DispatchEveryday

BuildShop + Install

CertificationASME Certified

Custom gates — St. George

What the work looks like in St. George.

Entrada, Stone Cliff, The Ledges, and Green Valley want driveway gates that match the architecture and pass design review the first time. The older lots in Bloomington and Dixie Downs mostly want a solid gate that swings true and a side-yard gate a trailer fits through.

A St. George gate starts with a site visit: the slope of the drive, where the operator would go, how the wind behaves on that lot, and what the neighborhood’s review board will want to see. After that comes a shop drawing for you to approve, fabrication and finish in St. George, and installation. Posts are set plumb in concrete, leaves are hung and adjusted, and hardware is tested.

Read the full scope of custom gates, or see everything the shop does in St. George.

Also in St. George

Other work on the same trip.

Stainless Pipe Welding

Sanitary and process stainless pipe, TIG-welded with a full argon purge so the inside of the joint is as clean as the outside.

Sanitary / food-grade tube
Process & utility piping
Repairs & tie-ins on existing stainless

Stainless Handrail & Railing

Stair, deck, and balcony railing in 304 or 316 stainless with cable, picket, or glass infill. Welds are ground flush and re-grained so the joints disappear.

Stair, deck & balcony rails
Cable & glass railing
Commercial ADA handrail

Custom Outdoor Furniture

Patio tables, benches, fire features, and planters in steel, stainless, or aluminum, built to hold up through 110-degree summers.

Dining tables & benches
Fire tables & planters
Restaurant & HOA patios

Trailer Repair & Fabrication

Cracked tongues, bent frames, hitches, fenders, ramps, and decks on utility, flatbed, and gooseneck trailers. Repaired in the shop or where the trailer sits.

Frame, tongue & hitch repair
Decks, ramps & fenders
Racks & modifications

Heavy Equipment Repair

Buckets, booms, sticks, and attachments on excavators, skid steers, loaders, and backhoes, repaired and hard-faced in the shop.

Bucket edges, teeth & hard-facing
Boom, stick & arm cracks
Skid-steer attachments

Structural Welding

Beams, columns, posts, stair stringers, and welded connections for builders, welded to the print in the shop or on the jobsite.

Beams, columns & posts
Welded connections & brackets
Stair stringers & landings

Farm & Ranch Metalwork

Ranch gates, corral panels, chutes, feeders, and implement and hitch repair, built in the shop or welded on the property.

Ranch gates & corral panels
Chutes, feeders & troughs
Implement & hitch repair

Mobile Welding & Repair

On-site welding for what cannot come to the shop: gates, railings, fences, fixtures, and trailers, repaired where they stand.

Gate & hinge repair
Railing & fence repair
On-site trailer repair

Custom Fabrication

Architectural stainless such as range hoods, counters, and shelving, plus brackets, frames, screens, and one-off parts.

Stainless hoods & counters
Brackets, frames & screens
One-offs built to print

Custom gates nearby: Washington City · Santa Clara · Ivins · Leeds. Or every town.

Common questions — St. George