(406) 480-4912 — call or text Mon–Fri 7a–6p · Sat 8a–2p St. George, Utah

Custom gates · Santa Clara, UT · Washington County · 12 min from the shop

Custom gates in Santa Clara, Utah.

Driveway, courtyard, and pedestrian gates for Santa Clara. Designed to the house, built automation-ready in St. George, and installed by the same welder, about 12 minutes from the shop.

Call (406) 480-4912

Call or text. Santa Clara is on the regular route.

Request a quote
Drive from shop12 Min
DispatchEveryday
BuildShop + Install
CertificationASME Certified

Custom gates — Santa Clara

What the work looks like in Santa Clara.

Santa Clara gates range from clean modern slat for the new parcels toward Snow Canyon to something that suits an orchard fence line on Santa Clara Drive. Both are hung to handle the wind that comes down the canyon.

A Santa Clara gate starts with a site visit: the slope of the drive, where the operator would go, how the wind behaves on that lot, and what the neighborhood’s review board will want to see. After that comes a shop drawing for you to approve, fabrication and finish in St. George, and installation. Posts are set plumb in concrete, leaves are hung and adjusted, and hardware is tested.

Read the full scope of custom gates, or see everything the shop does in Santa Clara.

Also in Santa Clara

Other work on the same trip.

Stainless Pipe Welding

Sanitary and process stainless pipe, TIG-welded with a full argon purge so the inside of the joint is as clean as the outside.

  • Sanitary / food-grade tube
  • Process & utility piping
  • Repairs & tie-ins on existing stainless

Stainless Handrail & Railing

Stair, deck, and balcony railing in 304 or 316 stainless with cable, picket, or glass infill. Welds are ground flush and re-grained so the joints disappear.

  • Stair, deck & balcony rails
  • Cable & glass railing
  • Commercial ADA handrail

Custom Outdoor Furniture

Patio tables, benches, fire features, and planters in steel, stainless, or aluminum, built to hold up through 110-degree summers.

  • Dining tables & benches
  • Fire tables & planters
  • Restaurant & HOA patios

Trailer Repair & Fabrication

Cracked tongues, bent frames, hitches, fenders, ramps, and decks on utility, flatbed, and gooseneck trailers. Repaired in the shop or where the trailer sits.

  • Frame, tongue & hitch repair
  • Decks, ramps & fenders
  • Racks & modifications

Heavy Equipment Repair

Buckets, booms, sticks, and attachments on excavators, skid steers, loaders, and backhoes, repaired and hard-faced in the shop.

  • Bucket edges, teeth & hard-facing
  • Boom, stick & arm cracks
  • Skid-steer attachments

Structural Welding

Beams, columns, posts, stair stringers, and welded connections for builders, welded to the print in the shop or on the jobsite.

  • Beams, columns & posts
  • Welded connections & brackets
  • Stair stringers & landings

Farm & Ranch Metalwork

Ranch gates, corral panels, chutes, feeders, and implement and hitch repair, built in the shop or welded on the property.

  • Ranch gates & corral panels
  • Chutes, feeders & troughs
  • Implement & hitch repair

Mobile Welding & Repair

On-site welding for what cannot come to the shop: gates, railings, fences, fixtures, and trailers, repaired where they stand.

  • Gate & hinge repair
  • Railing & fence repair
  • On-site trailer repair

Custom Fabrication

Architectural stainless such as range hoods, counters, and shelving, plus brackets, frames, screens, and one-off parts.

  • Stainless hoods & counters
  • Brackets, frames & screens
  • One-offs built to print

Custom gates nearby: Ivins · St. George. Or every town.

Common questions — Santa Clara

Custom gates in Santa Clara.

  • Q.01

    Do you come out to Santa Clara?

    Yes. Santa Clara is about 12 minutes from the shop in St. George and inside the everyday dispatch radius. Site measures, installs, deliveries, and on-site repairs are all routine.

  • Q.02

    Is there a trip charge to Santa Clara?

    Travel is included in the quote you get up front. It is not added afterward. Inside the everyday radius most jobs carry no separate trip fee.

  • Q.03

    Do you handle design review or HOA approval in Santa Clara?

    Yes, where the neighborhood has one. The drawing packet with materials, finish, and dimensions is part of the job. If your Santa Clara lot has no review process, the same drawing is what you approve before material is cut.

  • Q.04

    Where is the shop?

    The shop is in St. George, Utah. Shop-built pieces such as rails, gates, furniture, and spools are fabricated there and brought to Santa Clara. Repairs and tie-ins are done on site with the mobile rig. The same truck covers Ivins, and St. George.

Get a quote — Santa Clara

A gate designed for the house and built to last.

Call (406) 480-4912 Request a quote

Mon–Fri 7a–6p · Sat 8a–2p · texted photos help with quoting

Call the shop Get a quote