Stainless Pipe Welding
Sanitary and process stainless pipe, TIG-welded with a full argon purge so the inside of the joint is as clean as the outside.
- Sanitary / food-grade tube
- Process & utility piping
- Repairs & tie-ins on existing stainless
Stainless handrail · Ivins, UT · Washington County · 15 min from the shop
Stainless handrail in Ivins, Utah.
Stair, deck, balcony, and commercial railing for Ivins in brushed 316 stainless. Measured on site, built in St. George, installed by the same welder, about 15 minutes from the shop.
Call (406) 480-4912
Request a quote
Call or text. Ivins is on the regular route.
Drive from shop15 Min
DispatchEveryday
Material304 / 316
CertificationASME Certified
Stainless handrail — Ivins
What the work looks like in Ivins.
Kayenta’s design covenants favor railing that recedes into the view: low-gloss finishes, cable or glass infill, thin stainless posts. Ivins rails are built to satisfy the design review and the building inspector on the same drawing.
A Ivins rail starts with a site measure, because every stair and deck is a little different and a rail drawn from a plan instead of a tape shows it. It is then built in the shop in St. George, welded seamless and re-grained, and installed on a return trip. Cable, picket, or glass infill. Core-drilled, side-mounted, or plated. Built to the code the inspector will check it against.
Read the full scope of stainless handrail & railing, or see everything the shop does in Ivins.
Also in Ivins
Other work on the same trip.
Custom Gates
Driveway, entry, and courtyard gates built to the architecture. Modern slat, ornamental, or corten-look, automation-ready, and hung to stay true.
- Driveway swing & slide gates
- Courtyard & pedestrian gates
- Matching fence & panels
Custom Outdoor Furniture
Patio tables, benches, fire features, and planters in steel, stainless, or aluminum, built to hold up through 110-degree summers.
- Dining tables & benches
- Fire tables & planters
- Restaurant & HOA patios
Trailer Repair & Fabrication
Cracked tongues, bent frames, hitches, fenders, ramps, and decks on utility, flatbed, and gooseneck trailers. Repaired in the shop or where the trailer sits.
- Frame, tongue & hitch repair
- Decks, ramps & fenders
- Racks & modifications
Heavy Equipment Repair
Buckets, booms, sticks, and attachments on excavators, skid steers, loaders, and backhoes, repaired and hard-faced in the shop.
- Bucket edges, teeth & hard-facing
- Boom, stick & arm cracks
- Skid-steer attachments
Structural Welding
Beams, columns, posts, stair stringers, and welded connections for builders, welded to the print in the shop or on the jobsite.
- Beams, columns & posts
- Welded connections & brackets
- Stair stringers & landings
Farm & Ranch Metalwork
Ranch gates, corral panels, chutes, feeders, and implement and hitch repair, built in the shop or welded on the property.
- Ranch gates & corral panels
- Chutes, feeders & troughs
- Implement & hitch repair
Mobile Welding & Repair
On-site welding for what cannot come to the shop: gates, railings, fences, fixtures, and trailers, repaired where they stand.
- Gate & hinge repair
- Railing & fence repair
- On-site trailer repair
Custom Fabrication
Architectural stainless such as range hoods, counters, and shelving, plus brackets, frames, screens, and one-off parts.
- Stainless hoods & counters
- Brackets, frames & screens
- One-offs built to print
Stainless handrail nearby: Santa Clara · St. George · Dammeron Valley. Or every town.
Common questions — Ivins
Stainless handrail in Ivins.
- Q.01
Do you come out to Ivins?
Yes. Ivins is about 15 minutes from the shop in St. George and inside the everyday dispatch radius. Site measures, installs, deliveries, and on-site repairs are all routine.
- Q.02
Is there a trip charge to Ivins?
Travel is included in the quote you get up front. It is not added afterward. Inside the everyday radius most jobs carry no separate trip fee.
- Q.03
Do you install railing in Ivins, or just build it?
Both. The rail is measured on site in Ivins, built in the shop in St. George, and installed on a scheduled return trip. For a straightforward stair or deck that is usually one install visit.
- Q.04
Where is the shop?
The shop is in St. George, Utah. Shop-built pieces such as rails, gates, furniture, and spools are fabricated there and brought to Ivins. Repairs and tie-ins are done on site with the mobile rig. The same truck covers Santa Clara, St. George, and Dammeron Valley.
Get a quote — Ivins
Stainless railing, measured and installed by the welder who built it.
Mon–Fri 7a–6p · Sat 8a–2p · texted photos help with quoting